Stretch the edge of a worktop

1. On the Shape tab, in the Tools group, select the Stretch Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a single corner cut on a worktop corner

1. On the Shape tab, in the Tools group, select the Single Corner Cut option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a convex corner curve on a worktop corner

1. On the Shape tab, in the Tools group, select the Convex Corner Curve option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a concave corner curve on a worktop corner

1. On the Shape tab, in the Tools group, select the Concave Corner Curve option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a double corner cut on a worktop corner

1. On the Shape tab, in the Tools group, select the Double Corner Cut option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Split the edge of a worktop

1. On the Shape tab, in the Tools group, select the Split Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Merge the edge of a worktop

1. On the Shape tab, in the Tools group, select the Merge Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to merge.

TOP OF PAGE

Create a convex arc on the edge of a worktop

1. On the Shape tab, in the Tools group, select the Convex Arc option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a concave arc on the edge of a worktop

1. On the Shape tab, in the Tools group, select the Concave Arc option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Draw a freehand worktop

1. On the Shape tab, in the Tools group, select the Freehand worktop piece option.
   
2. Choose the Catalogue where the freehand worktop originates from.
3. Choose the required worktop.
4. Click where you would like the first corner of your freehand worktop to be.
5. Continue to click at the positions for each corner.
6. Complete the worktop by clicking on the first corner.

NOTE Individual dimensions for the freehand worktop can be specified within the Information group. If you make a mistake while creating the worktop, press the delete key on the keyboard. This will delete the last point added.

TOP OF PAGE

Automatically add joints to the worktops

1. On the Joint tab, in the Tools group, select the Auto joint worktops option.
   

TOP OF PAGE

Apply a corner joint to a worktop

1. On the Joint tab, in the Tools group, select the Apply corner joint to worktop option.
   
2. Click one of the red handles displayed to select the joint you wish to apply.
3. Click one of the white handles displayed to select the exact placement of the joint required.
4. Select the Apply option.

During the jointing process, Fusion FX displays each worktop in various colours indicating whether the worktop can be manufactured based on its size:

• Red: The worktop is too large and needs be resized or cut.
• Green: The worktop is within its size limits.
• Blue: The worktop is within its size limits but not recommended as optimum joint.

NOTE If any worktops are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Apply a vertical joint to a worktop

1. On the Joint tab, in the Tools group, select the Apply vertical worktop joint option.
   
2. Click one of the red handles displayed to indicate the joint you wish to apply.
3. Drag to move the joint.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

During the jointing process, Fusion FX displays each worktop in various colours indicating whether the worktop can be manufactured based on its size:

• Red: The worktop is too large and needs be resized or cut.
• Green: The worktop is within its size limits.
• Blue: The worktop is within its size limits but not recommended as optimum joint.

NOTE If any worktops are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Apply a horizontal joint to a worktop

1. On the Joint tab, in the Tools group, select the Apply horizontal worktop joint option.
   
2. Click one of the red handles displayed to indicate the joint you wish to apply.
3. Drag to move the joint.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

During the jointing process, Fusion FX displays each worktop in various colours indicating whether the worktop can be manufactured based on its size:

• Red: The worktop is too large and needs be resized or cut.
• Green: The worktop is within its size limits.
• Blue: The worktop is within its size limits but not recommended as optimum joint.

NOTE If any worktops are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Move a worktop joint vertex

1. On the Joint tab, in the Tools group, select the Move Joint Vertex Position option.
   
2. Click one of the red handles displayed to indicate the joint vertex you wish to move.
3. Drag to move the vertex.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

TOP OF PAGE

Rotate the worktop grain direction

1. On the Joint tab, in the Tools group, select the Rotate worktop Grain Direction option.
   
2. Click the centre of the arrow displayed against the required worktop to rotate the grain direction.
3. Select the Apply option.

TOP OF PAGE

Apply automatic worktop edging

1. On the Edge tab, select the blue handle that you want to apply the edging to.
2. On the Edge tab, in the Tools group, select the Name list.
   
3. Select the Add option.

TOP OF PAGE

Delete automatic worktop edging

1. On the Edge tab, in the Tools group, select the Name list.
   
2. Select the Delete option.

TOP OF PAGE

Link an item to a worktop

1. On the Link tab, in the Tools group, select the Link Mode option.
   
2. Select the required item from the Available Links list.
3. Select the Add option.

TOP OF PAGE

Delete a linked item from a worktop

1. On the Link tab, in the Tools group, select the Link Mode option.
   
2. Select the required item from the Applied Links list.
3. Select the Delete option.

TOP OF PAGE

Replace a worktop with an alternative item

1. On the Link tab, in the Tools group, select the Replace Mode option.
   
2. Select the required item from the Available Links list.
3. Select the Replace option.

NOTE The current selected item will be replaced.

TOP OF PAGE

Link a cut to the worktop

1. On the Link tab, in the Tools group, select the Add Cuts option.
   
2. Select the required item from the Available Links list.
3. Select the Add option.

TOP OF PAGE

Show worktop joint symbols on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select worktop Joint Symbols.

TOP OF PAGE

Show if a worktop is available on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select worktop Availability.

NOTE Green ticks will be shown for all available items.

TOP OF PAGE

Show the worktop grain direction on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select Grain Direction.

NOTE Double ended arrows will be shown on plan view.

TOP OF PAGE