Stretch the edge of a flyover shelf

1. On the Shape tab, in the Tools group, select the Stretch Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a single corner cut on a flyover shelf corner

1. On the Shape tab, in the Tools group, select the Single Corner Cut option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a convex corner curve on a flyover shelf corner

1. On the Shape tab, in the Tools group, select the Convex Corner Curve option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a concave corner curve on a flyover shelf corner

1. On the Shape tab, in the Tools group, select the Concave Corner Curve option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a double corner cut on a flyover shelf corner

1. On the Shape tab, in the Tools group, select the Double Corner Cut option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Split the edge of a flyover shelf

1. On the Shape tab, in the Tools group, select the Split Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Merge the edge of a flyover shelf

1. On the Shape tab, in the Tools group, select the Merge Selected Edge option.
   
2. Click one of the red handles displayed to select the edge you wish to merge.

TOP OF PAGE

Create a convex arc on the edge of a flyover shelf

1. On the Shape tab, in the Tools group, select the Convex Arc option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Create a concave arc on the edge of a flyover shelf

1. On the Shape tab, in the Tools group, select the Concave Arc option.
   
2. Click one of the red handles displayed to select the edge you wish to modify.
3. Drag to move the edge.
4. Specify the dimension within the Information group.
5. Select Apply within the Information group, or press Enter.

TOP OF PAGE

Draw a freehand flyover shelf

1. On the Shape tab, in the Tools group, select the Freehand flyover shelf piece option.
   
2. Choose the Catalogue where the freehand flyover shelf originates from.
3. Choose the required flyover shelf.
4. Click where you would like the first corner of your freehand flyover shelf to be.
5. Continue to click at the positions for each corner.
6. Complete the flyover shelf by clicking on the first corner.

NOTE Individual dimensions for the freehand flyover shelf can be specified within the Information group. If you make a mistake while creating the flyover shelf, press the delete key on the keyboard. This will delete the last point added.

TOP OF PAGE

Automatically add joints to the flyover shelves

1. On the Joint tab, in the Tools group, select the Auto joint Flyover shelves option.
   

TOP OF PAGE

Apply a corner joint to a flyover shelf

1. On the Joint tab, in the Tools group, select the Apply corner joint to flyover shelf option.
   
2. Click one of the red handles displayed to select the joint you wish to apply.
3. Click one of the white handles displayed to select the exact placement of the joint required.
4. Select the Apply option.

During the jointing process, Fusion FX displays each flyover shelf in various colours indicating whether the flyover shelf can be manufactured based on its size:

• Red: The flyover shelf is too large and needs be resized or cut.
• Green: The flyover shelf is within its size limits.
• Blue: The flyover shelf is within its size limits but not recommended as optimum joint.

NOTE If any flyover shelves are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Apply a vertical joint to a flyover shelf

1. On the Joint tab, in the Tools group, select the Apply vertical flyover shelf joint option.
   
2. Click one of the red handles displayed to indicate the joint you wish to apply.
3. Drag to move the joint.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

During the jointing process, Fusion FX displays each flyover shelf in various colours indicating whether the flyover shelf can be manufactured based on its size:

• Red: The flyover shelf is too large and needs be resized or cut.
• Green: The flyover shelf is within its size limits.
• Blue: The flyover shelf is within its size limits but not recommended as optimum joint.

NOTE If any flyover shelves are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Apply a horizontal joint to a flyover shelf

1. On the Joint tab, in the Tools group, select the Apply horizontal flyover shelf joint option.
   
2. Click one of the red handles displayed to indicate the joint you wish to apply.
3. Drag to move the joint.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

During the jointing process, Fusion FX displays each flyover shelf in various colours indicating whether the flyover shelf can be manufactured based on its size:

• Red: The flyover shelf is too large and needs be resized or cut.
• Green: The flyover shelf is within its size limits.
• Blue: The flyover shelf is within its size limits but not recommended as optimum joint.

NOTE If any flyover shelves are too large to be manufactured (as denoted by being drawn in red) you will not be able to select Next Stage.

TOP OF PAGE

Move a flyover shelf joint vertex

1. On the Joint tab, in the Tools group, select the Move Joint Vertex Position option.
   
2. Click one of the red handles displayed to indicate the joint vertex you wish to move.
3. Drag to move the vertex.
4. Specify the dimensions within the Information group.
5. Select the Apply option.

TOP OF PAGE

Rotate the flyover shelf grain direction

1. On the Joint tab, in the Tools group, select the Rotate Flyover shelf Grain Direction option.
   
2. Click the centre of the arrow displayed against the required flyover shelf to rotate the grain direction.
3. Select the Apply option.

TOP OF PAGE

Apply automatic flyover shelf edging

1. On the Edge tab, select the blue handle that you want to apply the edging to.
2. On the Edge tab, in the Tools group, select the Name list.
   
3. Select the Add option.

TOP OF PAGE

Delete automatic flyover shelf edging

1. On the Edge tab, in the Tools group, select the Name list.
   
2. Select the Delete option.

TOP OF PAGE

Link an item to a flyover shelf

1. On the Link tab, in the Tools group, select the Link Mode option.
   
2. Select the required item from the Available Links list.
3. Select the Add option.

TOP OF PAGE

Delete a linked item from a flyover shelf

1. On the Link tab, in the Tools group, select the Link Mode option.
   
2. Select the required item from the Applied Links list.
3. Select the Delete option.

TOP OF PAGE

Replace a flyover shelf with an alternative item

1. On the Link tab, in the Tools group, select the Replace Mode option.
   
2. Select the required item from the Available Links list.
3. Select the Replace option.

NOTE The current selected item will be replaced.

TOP OF PAGE

Link a cut to the flyover shelf

1. On the Link tab, in the Tools group, select the Add Cuts option.
   
2. Select the required item from the Available Links list.
3. Select the Add option.

TOP OF PAGE

Show flyover shelf joint symbols on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select Flyover shelf Joint Symbols.

TOP OF PAGE

Show if a flyover shelf is available on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select Flyover shelf Availability.

NOTE Green ticks will be shown for all available items.

TOP OF PAGE

Show the flyover shelf grain direction on plan view

1. On the View Tab in the Display group, select the Options List.
   
2. Select Grain Direction.

NOTE Double ended arrows will be shown on plan view.

TOP OF PAGE